Issue a hot work permit
In this tutorial you authorise a welding job in an area of a plant. The work must be documented with the due checks, last a few hours, and be verifiable on site by a supervisor or an inspector.
At the end you will have issued a permit that expires by itself and can be checked with a phone.
The same flow applies to the other high-risk permits — confined spaces, electrical work, work at height — and, in its simplest form, to authorising a person’s site access.
1. Create the procedure
Section titled “1. Create the procedure”The permit is issued through an action of type Procedure.
- Open the project and go to the office concerned.
- Go to Actions → Procedures and create a new procedure, for example “Permit to Work – Hot work”.
- Set its validity and the other parameters.

2. Associate the worker
Section titled “2. Associate the worker”Associate the person to be authorised with the procedure: in our case the welder who will do the job. The permit is then issued to a named individual, exactly like a nominal authorisation.

3. Issue the certificate
Section titled “3. Issue the certificate”From the scheduler, find the deadline for the person associated with the procedure and start the certificate creation.
In the New certificate window, turn on Time precision and set the release and expiry with their Hour: release at 13:00, expiry at 15:00, that is a two-hour permit.

The permit is now valid (see Permit statuses). Issuing does not require completed forms: the hot work form is filled in at the next step.
4. Fill in the hot work form
Section titled “4. Fill in the hot work form”4HSE provides predefined forms for permits to work: general work permit, hot work, confined spaces, electrical work, work at height (see Predefined forms and field types).
- Open the detail of the certificate you have just issued and go to Attachments.
- Click the Fill in a form icon, set Source to 4HSE and double-click Hot work permit.
- Fill in the form: the operator’s request, duration and validity, emergency information, safety measures, the authorisation and post-work monitoring. Sign where required.
- Click Finalize and choose Save in Files: the filled-in form becomes an attachment of the certificate.

See Fill in a form for the other ways to save it.
5. Generate the QR code
Section titled “5. Generate the QR code”From the certificate detail, click Verification QR. 4HSE produces a signed, temporary link and its QR code — see Generate the verification QR code.

Show it on screen, print it, or attach it to the permit document.
6. Verify the permit on site
Section titled “6. Verify the permit on site”The supervisor scans the QR with their phone. The public page opens, without any 4HSE account, and shows the permit’s status recalculated in real time.

What you have achieved
Section titled “What you have achieved”A welding job authorised to a named worker, documented by the hot work form attached to the certificate, valid for exactly two hours, and verifiable by anyone with a phone. After 15:00 the same QR will show Expired — with nothing to close by hand.
See Time-bound validity and Public verification.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.